Welcome To Freightmore Transport

Price Starts from $138,000+GST on Springs


  • Standard float gooseneck type construction, Low-Loader classification. These units allow extra payloads compared to standard Tri-Axle units. Main purpose of these units is for carting earthmoving machinery. Ultra heavy-duty Bi-fold ramps are standard.
  • Deck widens from 2.5m to 3.5m
  • Load up to 36 Tonnes without a load-sharing dolly, but with a dolly load 45-50 Tonnes (check your state regulations to establish the maximum allowable mass limits)
  • Also available in as an extendable model.
  • Optional winch fitted
  • Optional alloy rims
  • Air operated spare wheels cradle
  • Toolboxes
  • Lift up axles


Length Usable Deck length: 11,040 mm
Width Closed: 2500mm
Fully Widened: 3500mm
Height Deck Height: 950mm (on Low-Loader axles)
ATM: 60 Tonnes
Tare Weight 14.7 Tonnes


Side Coaming 8mm Thick Cold-Rolled sheet steel. Tensile Strength = 650mPa
Flooring 8mm Cold-Rolled flat sheet steel – High Tensile 650mPa. Under-Floor construction consists of heavy duty I-Beam cross-members, with industrial C-100 channel under-floor runners for extra support.
Skid-Plate 16mm Thick Oscillating Skid-Plate, with two position bolt-on king pin boss-plates fitted as standard.


4 x Deck widening cylinders (50mm wide chrome centre)

Petrol Power-Pack is standard (Diesel upgrade optional)


  • Heavy duty construction.
  • Landing Gear JOST or similar
  • King-Pin JOST or similar 50mm or 90mm as required.