Welcome To Freightmore Transport

$76900+GST on springs


  • A standard unit will feature all the necessities such as: JOST landing legs, 3-way twist locks, ramps for upper deck, tie-down points, 8mm thick laser cut side coaming, road-train bracket, LED side markers, ABS/EBS equipped.
  • Double welded I-Beam chassis construction allows for a tough and rigid frame. A strong inner sliding chassis rail allows for less payload reduction with increased length extension.
  • Fully forklift and machine rated floors are standard. These units extend from 45Ft to 70Ft.


Length Closed Length: 45 FT (13,720mm) – including the ramps
Extended Length: 70Ft (21,300mm) – including the ramps
WidthExterior: 2500mm
Height (bottom deck) 20 inch axles: 1150mm
19.5 inch axles: 1080mm
15 inch axles: 990mm
Capacity (ATM): 45 Tonnes
Capacity (GTM): 25 Tonnes
Tare Weight: Without Bi-Fold Ramps: 10.4 Tonnes
With Bi-Fold Ramps: 11.1 Tonnes


Side Coaming 8mm Thick Cold-Rolled sheet steel. Tensile Strength = 650mPa
Flooring 5mm Chequer-Plate flooring, mild steel at 350mPa tensile. Under-Floor construction consists of heavy duty I-Beam cross-members, with 30 x 30 x 3mm under-floor runners for extra support.
Skid-Plate 12mm Thick Skid-Plate, with two position bolt-on king pin boss-plates fitted as standard.
Road-Train Bracket 20mm thick folded C-Channel. With extra support gussets. Constructed from 350mPa mild steel.
Rear Tail-Gate Standard ADR construction: Industrial C-250 channel – with multiple supports welded. Standard rear bumper bar installed (constructed from 100 x 100 x 6mm RHS)


  • Heavy duty construction.
  • Landing Gear JOST or similar
  • King-Pin JOST or similar 50mm or 90mm as required.